Chocolate Software Forums

Please login or register.

Login with username, password and session length
Advanced search  
Pages: [1]   Go Down

Author Topic: Help needed (part 2) same problem!!!!! its bck  (Read 9231 times)

TJ

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Help needed (part 2) same problem!!!!! its bck
« on: August 17, 2006, 10:11:48 AM »
I CANT BELIVE IT, i have had this program for less than 2 weeks and this problem will NOT go away i am getting sick of FShost and am thinking about droping the program all together, yet again i am getting the error: ERROR creating FS2004 session. DirectX is reporting an error because UDP port 6073 is already in use. This can often be fixed by disabling your firewall or reconfiguring it to allow this port to be used by FSHost. McAfee's PrivacyService can also cause this problem. Some users have also reported that disconnecting their router from the internet before starting FSHost can fix the problem.

and once again i have no firewalls enabled or macafees security, and am now getting very annoyed >:(  can someone help??

i mean i have got it running for less then a day and then it comes up with the error again!!! rediculous
« Last Edit: August 17, 2006, 10:15:49 AM by TJ »
Logged

Randy

  • Junior Member
  • **
  • Offline Offline
  • Posts: 18
  • Yes, they call me the Streak
Re: Help needed (part 2) same problem!!!!! its bck
« Reply #1 on: August 17, 2006, 10:20:37 AM »
Sounds like you can't catch a break, here.  I know the 6073 error is a Direct X error, not FSHost.  It has something to do with how MS handles the Direct X & port 6073, but I can't remember where I read that.  It's here in the forum somewhere, just can't remember where.

You might search on "6073" and see if any of the prior posts offer any help. . .   
Logged
Randy
Classic Prop Server
http://classiflight.com

TJ

  • Newbie
  • *
  • Offline Offline
  • Posts: 2
Re: Help needed (part 2) same problem!!!!! its bck
« Reply #2 on: August 19, 2006, 01:38:02 AM »
ok thx will have a look around, thanks
Logged

mark957

  • Junior Member
  • **
  • Offline Offline
  • Posts: 13
    • ChicagoATC.net Virtual Flight Simulation
Re: Help needed (part 2) same problem!!!!! its bck
« Reply #3 on: September 11, 2006, 01:10:05 PM »
If you are running Windows XP, 2000 or server 200x, you can look in the Windows Event Log located under Control Panel/Administrative Tools.

Should list as a application or system error and tell you more about the problem.

Regards,

Mark Welborn
Logged

chustadt

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Re: Help needed (part 2) same problem!!!!! its bck
« Reply #4 on: March 09, 2019, 07:09:01 PM »
190309 20:35:20  ERROR creating FS2004 and FSX session. DirectX is reporting an error because UDP port 6073 is already in use. This can often be fixed by disabling your firewall or reconfiguring it to allow this port to be used by FSHost. McAfee's PrivacyService can also cause this problem. Some users have also reported that disconnecting their router from the internet before starting FSHost can fix the problem.
Suggestions do not work Port testing shows no faults I am at an end point.

Please Help It worked yesterday and now this?
Thank You
Logged
Pages: [1]   Go Up
« previous next »